ELECTRICIAN THEORY 5th SAMPLE PAPER ITI 1ST YEAR CBT TEST

ELECTRICIAN THEORY 5th SAMPLE PAPER ITI 1ST YEAR

1 / 25

Q3. Which material is coated in tungsten electrode of a fluorescent tube lamp? | फ्लोरोसेंट ट्यूब लैंप में टंगस्टन इलेक्ट्रोड को किस पदार्थ से लेपित किया जाता है?

2 / 25

Q21. Which type of lighting system is used for flood and industrial lighting? | फ्लड और औद्योगिक प्रकाश व्यवस्था के लिए किस प्रकार की प्रकाश व्यवस्था का उपयोग किया जाता है?

3 / 25

Which is the cold cathode lamp? | कोल्ड कैथोड लैंप कौन सा है?

4 / 25

Q19. What is the name of the joint? | इस जोड़ का क्या नाम है?

5 / 25

Q9. How many electrons are there in the valence shell of a copper atom? | तांबे के परमाणु के आबंध चक्र में कितने इलेक्ट्रान होते हैं?

6 / 25

Q3. What is the capacitance value of a capacitor that requires 0.5 coulomb to charge to 35 volt? | एक संधारित्र का धारिता मान क्या होगा, यदि 35 वोल्ट के लिए 0.5 कूलाम आवेश की आवश्यकता हो?

7 / 25

Which Personal Protective Equipment (PPE) is used for the protection from fumes? | धुएं से सुरक्षा के लिए किस व्यक्तिगत सुरक्षा उपकरण (पीपीई) का उपयोग किया जाता है?

8 / 25

 What is the name of the safety sign? | इस सुरक्षा चिन्ह का नाम क्या है?

9 / 25

Q38. What is the purpose of ELCB? | ELCB का उद्देश्य क्या है?

10 / 25

Q3. What is the purpose of underwriter's knot for pendant holder connection? | पेंडेंट होल्डर संयोजन के लिए अंडरराइटर की गाँठ का उद्देश्य क्या है?

11 / 25

Q35. What is the name of the lighting circuit? | प्रकाशीय परिपथ का क्या नाम है?

12 / 25

Q9. What is the effect of low current rated cable used to connect higher current load? | कम धारा रेटेड केबल को उच्च धारा भार में जोड़ने क्या प्रभाव होगा?

13 / 25

Q36. What is the tool used to bend conduits? | कन्ड्यूट को मोड़ने के लिए किस उपकरण का उपयोग किया जाता है?

14 / 25

Q44. What is length of thread on rigid conduits as per BIS? | बीआईएस के अनुसार कठोर कन्ड्यूट पर थ्रेड की लंबाई क्या है?

15 / 25

Which condition is absolutely essential for parallel operation of two transformers? | दो ट्रांसफार्मर के समानांतर संचालन के लिए कौन सी स्थिति बिल्कुल आवश्यक है?

16 / 25

What is the composition of steel and silicon steel in transformer core? | ट्रांसफार्मर कोर में स्टील और सिलिकॉन स्टील की संरचना क्या है?

17 / 25

 What is the condition for obtaining maximum efficiency from transformer? | ट्रांसफार्मर से अधिकतम दक्षता प्राप्त करने के लिए क्या शर्त है?

18 / 25

Q21. Calculate the apparent power of a star connected 3 phase load, if it is connected across 3 phase 415 volt/50Hz supply at 0.8 p.f and the phase current is 10 Amps. | एक स्टार में जुड़े 3 कला भार की आभासी शक्ति की गणना करें, अगर यह 0.8 शक्ति गुणांक पर 3 कला 415volt / 50Hz आपूर्ति से जुड़ा है और फेज़ धारा 10 A है।

19 / 25

Q32. Which 3 phase system, the artificial neutral is required to measure the phase voltage? | कौन सी 3 कला प्रणाली में, फेज़ वोल्टेज को मापने के लिए कत्रिम उदासीन तार की आवश्यकता होती है?

20 / 25

Q33. What is the change in value of resistance of the conductor, if its cross section area is doubled? |चालक के प्रतिरोध के मान में क्या परिवर्तन होता है, अगर इसका अनुप्रस्थ काट क्षेत्रफल दोगुना हो जाता है?

21 / 25

Q38. Which resistor the lowest current flows in a parallel circuit having the values of 50 Ω 220 Ω, 450 Ω and 560 Ωconnected with supply? | समान्तर परिपथ में जुड़े हुए 50Ω, 220Ω, 450Ω तथा 560Ω प्रतिरोधों में से किस प्रनतरोध में सबसे कम धारा बहाव होगा?

22 / 25

Q26. Which one defines the change in resistance in Ohm(Ω) per degree centigrade (°C)? | ओम प्रति डिग्री सेंटीग्रेड(°C) में प्रतिरोध में परिवर्तन को कौन सा परिभाषित करता है?

23 / 25

Q14. Which type of half lap joint is used if one part of a job meets another part at some distance from the ends? | किस प्रकार का अर्ध लैप जोड़ प्रयोग किया जाता है, जब जॉब का एक भाग सिरों के अंत से कुछ दूरी से मिलता है?

24 / 25

Q15. Which type of notch is used for making a metal tray with 90° bend and an inside flange? | 90° मोड़ और अंदर से निकले हेतु किनारे के साथ धातु ट्रै बनाने के लिए किस प्रकार के नॉच का उपयोग किया जाता है।

25 / 25

Q22. What is the name of the stake used for sheet metal work? | शीट मेटल कार्य के लिए उपयोग होने वाले स्टेक का क्या नाम है?

Your score is

The average score is 58%

0%

Leave a Reply

Your email address will not be published. Required fields are marked *